26 models
Silicone neon mounting accessories · 3 categories · 70 models中文 ↗
SILICONE NEON MOUNTING ACCESSORIES
Aluminum Mounting Channels
Channel profiles for silicone neon assemblies. Start with the matching strip cross-section, then confirm the required model.
CHOOSE BY MOUNTING METHODThree categories · Models kept distinctExplore the model directory ↓
MOUNTING OPTIONS
Three mounting options
Choose a mounting method, then compare matching profiles, product views and dimensions.
20 models
Aluminum Mounting Clips
Screw-mounted aluminum clips for holding matched silicone linear-light profiles in place.View SKU images
24 models
Flexible Mounting Tracks
Segmented mounting tracks for silicone linear-light routes that need to follow a curved path. Select by the matched profile.View SKU imagesSKU DIRECTORY
Aluminum Mounting Channels
Channel profiles for silicone neon assemblies. Start with the matching strip cross-section, then confirm the required model.
Showing 26 of 26 SKUs
Choose by model and compatibility notes. The lower-right inset shows accessory cross-section dimensions. Manual measurements may vary; click an image to enlarge the details.
Model / selection size
6 × 6 mm
Model / selection size
6 × 12 mm
Model / selection size
8 × 8 mm
Model / selection size
8 × 16 mm
Model / selection size
10 × 10 mm
Model / selection size
10 × 18 mm
Model / selection size
10 × 20 mm
Model / selection size
12 × 12 mm
Model / selection size
12 × 25 mm
Model / selection size
14 × 14 mm
Model / selection size
15 × 10 mm
Model / selection size
15 × 25 mm
Model / selection size
16 × 16 mm
Model / selection size
18 × 10 mm
Model / selection size
20 × 10 mm
Model / selection size
20 × 14 mm
Model / selection size
20 × 20 mm
Model / selection size
25 × 17 mm
Model / selection size
30 × 10 mm
Model / selection size
30 × 20 mm
Model / selection size
40 × 25 mm
Model / selection size
50 × 25 mm
Model / selection size
60 × 30 mm
Reference width ≈60 mm, height ≈30 mm; wall thickness 0.8 mm. Width and height are model-based estimates, not measured dimensions.
Check compatibilityModel / selection size
70 × 30 mm
Reference width ≈70 mm, height ≈30 mm; wall thickness 0.8 mm. Width and height are model-based estimates, not measured dimensions.
Check compatibilityModel / selection size
80 × 30 mm
Reference width ≈80 mm, height ≈30 mm; wall thickness 0.8 mm. Width and height are model-based estimates, not measured dimensions.
Check compatibilityModel / selection size
100 × 30 mm
Reference width ≈100 mm, height ≈30 mm; wall thickness 0.8 mm. Width and height are model-based estimates, not measured dimensions.
Check compatibilitySELECTION NOTES
Match the profile, then confirm the mounting
01 / Aluminum channelsFor assemblies that need a channel profile or edge guidance. Select by the silicone strip profile and size; nearby dimensions are not treated as interchangeable.
02 / Mounting clipsThe supplied photos show screw-mounted aluminum clips. Check both the matched profile and intended fixing position before selecting.
03 / Flexible tracksFor segmented mounting that follows a curved route. Special profiles such as three-side emission are confirmed separately rather than combined with standard models.