Product system

Integrated Extrusion Front-Emitting Silicone LED Strips

Choose a front-emitting silicone strip by the light-facing profile and mounting outline. Compare borderless, flanged and other documented finishes using the individual cross-section drawings.

Selection guide & questions ↓
Product models
27
Model groups
4

01

Defined cut intervals

Cut every 5 cm at 24V or 2.5 cm at 12V to match the required project length.

02

100–200 m rolls · 3-year warranty

Full-roll supply for fabrication and project stock. Supply-roll length is not the single-feed operating length.

03

Suitable for outdoor use

For outdoor linear lighting. Seal cut ends, cable exits and connections with the matched installation system.

03 · Products

Browse by product series

27

Product series 01

Integrated Extrusion Front-Emitting Borderless Series

15 products

Product series 02

Integrated Extrusion Front-Emitting Black Housing Series

2 products

Product series 03

Integrated Extrusion Front-Emitting Honeycomb Series

2 products

Product series 04

Integrated Extrusion Front-Emitting Flanged Series

8 products

SELECTION GUIDE

Choosing a front-emitting silicone strip

Read the complete cross-section

Check height, emitting width and the overall width of a flanged profile. Different finishes or faces should not be treated as interchangeable products.

Cut at the specified interval

12V versions use 2.5 cm cutting sections; 24V versions use 5 cm sections. These are fixed intervals, not the free-cut feature of the solderless series.

Plan supply and installation

100–200 m rolls describe supplied material, not a single powered run. The series has a 3-year warranty; confirm applicable terms and the installation configuration.

Before you specify

Does a 100–200 m roll work from one power feed?

Supply-roll length and powered-run length are different. Plan section lengths, power supplies and feed points for the exact voltage and configuration; do not use the roll length as a continuous-power specification.

Can these strips be used outdoors after cutting?

Outdoor use requires the correct connectors and restored end sealing after cutting. Where an IP67 configuration is specified, it applies only to the correctly assembled complete termination system; it is not a blanket claim of continuous-submersion suitability.

Do 110V/220V versions use the same cutting intervals?

Do not infer high-voltage intervals from the 12V/24V figures. Confirm the selected high-voltage version's cutting, color/control options, power and accessories. Professional installation is required; do not mix high- and low-voltage accessories.

B2B PROJECT SUPPORT

Need help matching a product to your project?

Send your target dimensions, installation environment and quantity. For LED strips, include the voltage and run length; for empty tubing, include the PCB width to be fitted.

WhatsApp