Integrated-extrusion silicone body with side-facing light
Product main · ES-1212Integrated Extrusion Side-Emitting Series
12 × 12 mm Side-Emitting Silicone LED Strip
Model: ES-1212
12 × 12 mm standard profile side-emitting silicone strip. 24V/5 cm or 12V/2.5 cm cuts; 100–200 m supply rolls, not powered run length. 3-year warranty; outdoor use requires matched end seals.
- Model
- ES-1212
- Series
- Integrated Extrusion Side-Emitting Series
- Size
- 12 mm × 12 mm
- Voltage
- 12V / 24V / 110V / 220V
- Light output
- Side view
Confirm before orderingConfirm voltage, exact variant, run length and accessories during quotation.
Source-confirmed product data · jinyuan@jinyiled.com
12V/24V low-voltage and 110V/220V high-voltage versions are available. The 12 detailed rows describe low-voltage light configurations; high-voltage parameters are version-specific, and not every listed light or control configuration is established for high voltage.
Current product + variant
Choose a source-confirmed variant
- Product model
- ES-1212
- Current variant
- ES-1212 3000K
- Voltage
- 12V / 24V
- CCT / wavelength
- 3000K
- LED
- SMD 2835
- LED quantity
- 120 LEDs
- Power
- 9 W/m
- Efficacy
- 60-70 lm/W
- CRI
- 80/90
- Cut length
- 24V: 5 cm / 12V: 2.5 cm
- Maximum run
- 8 m
The main image and cross-section belong to the product model above. The values below belong only to the selected variant.
Silicone LED Strips
Product overview
12 × 12 mm standard profile integrated-extrusion side-emitting silicone LED strip for architectural outlines, display channels and outdoor linear lighting. Low voltage: 12V / 24V; high voltage: 110V / 220V available. Cut every 5 cm at 24V or every 2.5 cm at 12V. 100–200 m supply rolls with a 3-year warranty. Suitable for outdoor use with correctly sealed cut ends, joints and cable exits.
Product highlights
12 × 12 mm · Standard Profile
Low voltage: 12V / 24V; high voltage: 110V / 220V available
Cut every 5 cm at 24V or every 2.5 cm at 12V.
100–200 m supply rolls · 3-year warranty
Outdoor use with sealed terminations and connections
Source-confirmed options
Available variants
12 options
| Variant | Voltage | CCT | Color | LED | LED quantity | Power | Efficacy | CRI |
|---|---|---|---|---|---|---|---|---|
| ES-1212-3000K | 12V / 24V | 3000K | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-4000K | 12V / 24V | 4000K | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-6500K | 12V / 24V | 6500K | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-RED | 12V / 24V | Red | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-GREEN | 12V / 24V | Green | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-BLUE | 12V / 24V | Blue | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-YELLOW | 12V / 24V | Yellow | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-ORANGE | 12V / 24V | Orange | SMD 2835 | 120 LEDs | 9 W/m | 60-70 lm/W | 80/90 | |
| ES-1212-CW | 12V / 24V | CW | SMD 2835 | 120 LEDs | 8 W/m | 60-70 lm/W | ||
| ES-1212-RGB | 12V / 24V | RGB | SMD 3535 | 120 LEDs | 5 W × 3/m | — | ||
| ES-1212-PIXEL | 12V / 24V | Pixel | SMD 3535 | 96 LEDs | 5 W × 3/m | — | ||
| ES-1212-DMX512 | 12V / 24V | DMX512 | SMD 3535 | 96 LEDs | 5 W × 3/m | — |
Verified specifications
Technical data
- Warranty
- 3 years
Traceable data
Source-confirmed specifications
- Cross-section / profile
- 12 × 12 mm · Standard Profile Source confirmed
- Light output
- Side-emitting Source confirmed
- Voltage options
- Low voltage: 12V / 24V; high voltage: 110V / 220V available Source confirmed
- Low-voltage cutting intervals
- Cut every 5 cm at 24V or every 2.5 cm at 12V. Source confirmed
- Supply roll
- 100–200 m per roll Source confirmed
- Warranty
- 3 years Source confirmed
- Environment
- Outdoor use with sealed ends and joints Source confirmed
- High-voltage parameters
- 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters. Review required
- LED quantity and CW
- Confirm the LED quantity basis, exact CW range and control configuration during quotation. Review required
Technical diagram
Cross section
Shown separately from the product main image.
Cross section · ES-1212 · mm
Cross section · ES-1212Applications
Project fit
Selection guidance
- Choose a 12V/24V low-voltage or 110V/220V high-voltage version first, then match its light option, control method, power system and terminations. Do not mix low- and high-voltage components.
- Match hardware to the exact 12 × 12 mm standard profile section, light face and installation space.
- Confirm the permitted bend direction and radius for the selected model; avoid sharp folds, twisting or pressure on the light face.
- 100–200 m is the supply roll length, not a single-ended powered run. The 8 m figure in the low-voltage table is the source connection length, not a no-voltage-drop promise. Confirm the power-feed plan for the selected high-voltage version separately.
- Use matched end caps, wiring and seals outdoors. Restore sealing after cutting or wiring and allow for drainage and maintenance. Outdoor suitability does not establish continuous-submersion suitability.
Service planning
Long-term use
Install planned runs with adequate support and avoid sharp folds, twisting and heat accumulation. Keep drivers, controllers and terminations accessible; inspect outdoor end caps, joints and cable seals during maintenance.
Scope boundary
Important limitations
- For IP67-rated variants, the rating applies only after the complete termination system is correctly assembled and sealed. Restore the seals after cutting or wiring.
- If a 110V/220V variant is selected, installation must be carried out by a qualified professional. Do not mix its power supplies, connectors or accessories with 12V/24V or other low-voltage versions.
- 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters.
- Images show a sample of the corresponding profile. Any voltage or light-color markings on that sample do not apply to every available version.
- Confirm the exact CW range, control method and LED quantity basis. Source certification icons alone are not a complete-product certification claim.
Technical clarification
Questions & answers
Which low- and high-voltage options are available?
Low voltage: 12V / 24V; high voltage: 110V / 220V available. 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters.
What are the 12V and 24V cutting intervals?
Cut every 5 cm at 24V or every 2.5 cm at 12V. Follow the marks for the selected version and restore end seals after cutting or wiring. These intervals do not establish high-voltage cutting requirements.
Can the entire 100–200 m roll be powered from one end?
100–200 m is the supply roll length, not a single-ended powered run. The 8 m figure in the low-voltage table is the source connection length, not a no-voltage-drop promise. Confirm the power-feed plan for the selected high-voltage version separately.
What are the outdoor-use and warranty conditions?
This series is suitable for outdoor use and has a 3-year warranty. Use matched end caps, wiring and seals outdoors. Restore sealing after cutting or wiring and allow for drainage and maintenance. Outdoor suitability does not establish continuous-submersion suitability. Confirm the warranty terms with the ordered configuration.
How do I match a channel to this 12 × 12 mm profile?
Check this exact cross-section, light-emitting face, mounting method and end-cap fit. Confirm with a sample before volume installation.