15 × 10 mm profile
Product main · SL-1510-CCSolderless Front-Emitting Flanged Series
15 × 10 mm Solderless Front-Emitting Flanged Silicone LED Strip
Model: SL-1510-CC
15 × 10 mm free-cut solderless silicone LED strip with no wire soldering and an 8 m voltage-drop-free run on 12V/24V versions.
- Model
- SL-1510-CC
- Series
- Solderless Front-Emitting Flanged Series
- Size
- 15 mm × 10 mm
- Voltage
- 12V / 24V / 110V / 220V
- Light output
- Front view
Confirm before orderingConfirm voltage, exact variant, run length and accessories during quotation.
Source-confirmed product data · jinyuan@jinyiled.com
12V/24V low-voltage and 110V/220V high-voltage versions are available. The 12 detailed rows describe low-voltage light configurations; high-voltage parameters are version-specific, and not every listed light or control configuration is established for high voltage.
Current product + variant
Choose a source-confirmed variant
- Product model
- SL-1510-CC
- Current variant
- SL-1510-CC 3000K
- Voltage
- 12V / 24V
- CCT / wavelength
- 3000K
- LED
- SMD 2835
- LED quantity
- 120 LEDs
- Power
- 9 W/m
- Efficacy
- 50–60 lm/W
- CRI
- 80 / 90
- Cut length
- Free cut to the required length
- Voltage-drop-free run
- 8 m (12V/24V)
The main image and cross-section belong to the product model above. The values below belong only to the selected variant.
Silicone LED Strips
Product overview
15 × 10 mm Solderless Front-Emitting Flanged Silicone LED Strip for medium-width installations that require a front-emitting flanged profile. Low voltage: 12V / 24V; high voltage: 110V / 220V available. The specification table retains twelve low-voltage white-light, single-color and controllable-light options; high-voltage parameters are version-specific. The strip can be cut freely to the required length and connected without wire soldering. Voltage and brightness remain stable within the first 8 m; beyond 8 m, voltage and brightness decrease on 12V/24V versions. This model has a front-emitting flanged profile. Confirm the matched connector, termination and driver for the selected configuration.
Product highlights
Solderless Front-Emitting Flanged
Low voltage: 12V / 24V; high voltage: 110V / 220V available
12 low-voltage light and control configurations
Free cut to the required project length
Solderless connection — no wire soldering required
No voltage drop within the first 8 m on 12V/24V versions
Beyond 8 m, voltage and brightness decrease on 12V/24V versions
Source-confirmed options
Available variants
12 options
| Variant | Voltage | CCT | Color | LED | LED quantity | Power | Efficacy | CRI |
|---|---|---|---|---|---|---|---|---|
| SL-1510-CC-3000K | 12V / 24V | 3000K | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-4000K | 12V / 24V | 4000K | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-6500K | 12V / 24V | 6500K | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-RED | 12V / 24V | Red | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-GREEN | 12V / 24V | Green | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-BLUE | 12V / 24V | Blue | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-YELLOW | 12V / 24V | Yellow | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-ORANGE | 12V / 24V | Orange | SMD 2835 | 120 LEDs | 9 W/m | 50–60 lm/W | 80 / 90 | |
| SL-1510-CC-CW | 12V / 24V | CW | SMD 2835 | 120 LEDs | 8 W/m | 50–60 lm/W | ||
| SL-1510-CC-RGB | 12V / 24V | RGB | SMD 3535 | 120 LEDs | 5 W × 3/m | — | ||
| SL-1510-CC-PIXEL | 12V / 24V | Pixel | SMD 3535 | 96 LEDs | 5 W × 3/m | — | ||
| SL-1510-CC-DMX512 | 12V / 24V | DMX512 | SMD 3535 | 96 LEDs | 5 W × 3/m | — |
Traceable data
Source-confirmed specifications
- Profile size
- 15 × 10 mm Source confirmed
- Light direction / profile
- Solderless Front-Emitting Flanged Source confirmed
- Available input voltage
- Low voltage: 12V / 24V; high voltage: 110V / 220V available Source confirmed
- High-voltage options
- 110V / 220V high-voltage versions available Source confirmed
- High-voltage version parameters
- 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters. Review required
- Detailed table scope
- 12V/24V low-voltage and 110V/220V high-voltage versions are available. The 12 detailed rows describe low-voltage light configurations; high-voltage parameters are version-specific, and not every listed light or control configuration is established for high voltage. Source confirmed
- White / single-color / CW LED
- SMD 2835 Source confirmed
- RGB / Pixel / DMX512 LED
- SMD 3535 Source confirmed
- LED quantity basis
- The product sheet lists 120 LEDs for SMD 2835/RGB and 96 LEDs for Pixel/DMX512, but does not state whether the quantity is per metre Review required
- Cutting
- Free cut to the required length Source confirmed
- Solderless connection
- No wire soldering required Source confirmed
- Voltage-drop-free run
- Voltage and brightness remain stable within the first 8 m; beyond 8 m, voltage and brightness decrease on 12V/24V versions. Source confirmed
- SMD 2835 efficacy row
- 50–60 lm/W Source confirmed
- Single-color wavelengths
- Red 620–625 nm · Green 520–525 nm · Blue 460–470 nm · Yellow 590–595 nm · Orange 600–610 nm Source confirmed
- CW range
- The product sheet prints 1800–25000K; confirm the exact adjustable range before quotation Review required
Technical diagram
Cross section
Shown separately from the product main image.
Cross section · SL-1510-CC · mm
Cross section · SL-1510-CCApplications
Project fit
Selection guidance
- Confirm that the 15 × 10 mm profile fits the reserved installation space.
- Choose a 12V/24V low-voltage or 110V/220V high-voltage version first, then match its light option, control method, power system and terminations. Do not mix low- and high-voltage components.
- 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters.
- For 12V/24V runs longer than 8 m, plan additional power-feed points because voltage and brightness decrease beyond the first 8 m.
- Validate the connector, end caps, cable exit and mounting channel with a physical sample before production quantities.
Service planning
Long-term use
Keep the driver, controller and terminations accessible for inspection. Support the full run, avoid sharp twists and heat accumulation, and test the complete assembled length before permanent installation. Recheck end seals and cable exits during maintenance.
Scope boundary
Important limitations
- For IP67-rated variants, the rating applies only after the complete termination system is correctly assembled and sealed. Restore the seals after cutting or wiring.
- If a 110V/220V variant is selected, installation must be carried out by a qualified professional. Do not mix its power supplies, connectors or accessories with 12V/24V or other low-voltage versions.
- The document does not establish a complete-product IP rating; ingress protection depends on the ordered construction, termination and installation.
- The CW row is printed as 1800–25000K and requires confirmation before it is used as a quotation value.
- 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters.
- This is a front-emitting flanged profile; connectors must match its actual cross-section.
Technical clarification
Questions & answers
Are both low- and high-voltage versions available?
Low voltage: 12V / 24V; high voltage: 110V / 220V available. 110V/220V high-voltage versions are available. Confirm cutting requirements, power, LED quantity, powered run length, AC/DC type and light/control configuration for the high-voltage version; do not apply 12V/24V parameters.
What should be confirmed for the 15 × 10 mm profile before ordering?
Confirm the profile space, voltage, light or control option, required run length, connector, end caps, cable exit, mounting system and driver scope.
Can the strip be cut freely to the required length?
Yes. It can be cut freely to the required project length and connected with the matched solderless connector, with no wire soldering required.
What happens when the run exceeds 8 m?
Voltage and brightness remain stable within the first 8 m; beyond 8 m, voltage and brightness decrease on 12V/24V versions.